|
 |
| |
|
| E-mail |
lon@ntu.edu.tw |
| 辦公室 |
電機二館 539室 |
| 辦公室時間 |
|
| 電話 |
+886-2-33663659 |
| 網頁 |
http://www2.ee.ntu.edu.tw/~lon/ |
| 研究領域 |
研究領域：奈米光電元件、先進半導體製程技術、光纖通信元件、光纖感測
．光電基板上的奈米光電元件
．先進半導體微影製程產生奈米結構供光電顯示等應用。
．光電封裝技術: 半導體雷射與光波導間的光電構裝。
．光纖被動元件例如光纖光柵的設計、製作與量測。
．光纖主動元件例如通信與感測用的雷射光纖光源。
兼顧實驗與理論，培養興趣，發展才能。
計畫來源：國科會、工研院、產業界。 |
| 個人簡介 |
Lon A. Wang (王 倫) received his Ph.D. degree in Optical Sciences Center from the University of Arizona in 1988. Following graduation, he continued as postdoctoral researcher. In 1989 he joined Bell Communication Research (BEELCORE) where he worked in the areas of wavelength division multiplexing technologies and optical fiber network system technologies. In 1992, he joined the Institute of Electro-Optical Engineering and the Department of Electrical Engineering, National Taiwan University, where he is currently a professor. His current interests are design, fabrication, and modeling of active and passive fiber devices and guided-wave components for photonic integrated circuits, optical fiber communication and sensing system applications; semiconductor nano-fabrication for integrated circuits and electro-optical devices. |
| 重要著作 |
1. Jer-Haur Chang, Fang-Sung Cheng, Chi-Chung Chao, Yung-Chun Weng, Sen-Yeu Yang, and L. A. Wang, "Direct imprinting using soft mold and gas pressure for large area and curved surface," J. Vac. Sci. Technol. A, Vol. 23, No. 6, pp. 1687-1690, Nov. 20052. H. C. Su and L. A. Wang, "A Highly Efficient Polarized Superfluorescent Fiber Source for Fiber-Optic Gyroscope Applications," IEEE Photonics Technology Letters, Vol. 15,No 10, pp.1357-1359, 2003.3. W. C. Cheng and L. A. Wang, "Phase masks working in 157 nm wavelength fabricated by immersion interference photolithography," J. Vac. Sci. Technol. B 21(B), pp. 3078-3081, 2003.4. C. Y. Lin, L. A. Wang, and G. W. Chern, "Corrugated Long Period Fiber Gratings as Strain, Torsion, and Bending Sensors," IEEE J. Lightwave Technol, Vol.19, No.8, pp.1159-1168, 2001. |
| 附檔 |
|
 |
|
|
 |
|
| |
| |
 |
|
