Dr. Jui-che Tsai received the B.S. degree in Electrical Engineering from National Taiwan University (NTU), Taiwan, in 1997. He entered the Graduate Institute of Electro-Optical Engineering (currently named GIPO) at NTU after completing his undergraduate study, and received the M.S. degree in Electro-Optical Engineering in 1999. He received the Ph.D. degree in Electrical Engineering from the University of California, Los Angeles (UCLA), in 2005.
Between 1999 and 2001, he served in the military as a second lieutenant. Before joining the faculty of NTU, he was a Postdoctoral Researcher with the Department of Electrical Engineering and Computer Sciences and Berkeley Sensor and Actuator Center (BSAC), University of California, Berkeley. He is now a Professor of the Graduate Institute of Photonics and Optoelectronics (GIPO) and the Department of Electrical Engineering, National Taiwan University, Taiwan. His research interests include optical MEMS, MEMS technologies, optical fiber communication, and biophotonics.
| Representative Publications
 C. D. Liao and J. C. Tsai*, “A cantilever force sensor combined with a spherical reflecting mirror for sensitivity enhancement of an optical detection system,” IEEE Journal of Selected Topics in Quantum Electronics, accepted. (SCI, EI)
 J. C. Tsai*, R. J. Lai, C. Y. Yin, D. S. Chen, and P. F. Yeh, “An out-of-plane rotational platform with in-plane electrostatic combs made by the MetalMUMPs process,” J. Micromech. Microeng., accepted. (SCI, EI)
 J. C. Tsai*, R. J. Lai, C. Y. Yin, D. S. Chen, C. K. Shen, and Y. T. Chang, “A vertical electrothermal actuator with separated metal and nitride structural layers,” Journal of Micro/Nanolithography, MEMS, and MOEMS, accepted. (SCI, EI)
 C. D. Liao and J. C. Tsai*, “The evolution of MEMS displays,” IEEE Transactions on Industrial Electronics, Vol. 56, No. 4, pp. 1057-1065, Apr. 2009. (SCI, EI)
 J. C. Tsai*, T. L. Hsieh, C. D. Liao, S. J. Chiou, D. Hah, and M. C. Wu “Experimental characterization of two-axis MEMS scanners with hidden radial vertical combdrive actuators and cross-bar spring structures,” J. Micromech. Microeng. Vol. 19, No. 4, 045002, Apr. 2009. (SCI, EI)
 J. C. Tsai*, S. J. Chiou, T. L. Hsieh, C. W. Sun, D. Hah, and M. C. Wu, “Two-axis MEMS scanners with radial vertical combdrive actuators – design, theoretical analysis, and fabrication,” Journal of Optics A: Pure and Applied Optics, Vol. 10, No. 4, 044006, April 2008. (SCI, EI)
 J. C. Tsai*, L. C. Lu, W. C. Hsu, C. W. Sun, and M. C. Wu, “Linearization of a two-axis MEMS scanner driven by vertical comb-drive actuators,” J. Micromech. Microeng., Vol. 18, No. 1, 015015, Jan. 2008. (SCI, EI)
 J. C. Tsai*, C. Y. Yin, C. W. Sun, and M. C. Wu, “Analysis of the interchannel response in a MEMS 1xN2 wavelength-selective switch,” OSA Applied Optics, Vol. 46, No. 16, pp. 3227-3232, June 1, 2007. (SCI, EI)